HYPERDRIVE | VESC (75V/100A)
$149
Want the same VESC motor controller from our HYPERDRIVE Motor Modules? Problem solved! With a 75V rating and continuous current capacity of 100A, this VESC is great for powering your drivetrain or weapon. Works with VESC Project's VESC Tool Software!
HYPERDRIVE VESC Specs
| Voltage Range (V) |
14-84VDC (4-20S LiPo) |
| Continuous Current (A) |
100A |
| Max Current (A) |
120A |
|
BEC |
5VDC @ 1.5A |
| Max ERPM |
150,000 |
| USB Communication Type |
USB-C |
| Supported Sensor Types |
ABI, Hall, AS5x47, AS5x48 |
| Supported Input Types |
PPM, ADC, NRF, UART |
| Wire Size (AWG) |
12 AWG |
| Size (Length*Width*Height, mm) |
103mm x 58mm x 5.9-18.5mm |
| Mass (g, lbs) | 225 grams (0.5 lbs) |
| Connector Types |
4mm Bullets (Phase), XT90 (Power) |
WARNING: This VESC does NOT have Phase Filters! Please turn OFF the phase filter function and choose "false" in VESC Tool when using firmware version on or above 5.3 (VESC_TOOL 3.01). Failing to turn off the phase filter will result in VESC damage. DO NOT restore the default parameters when using the wizard interface.