Skip to content

HYPERDRIVE Module

Regular price $599

Unit price per 

Gear Ratio

Rear Motor Support Kit (Installed)

Finally, an OTS plug-n-play brushless gearmotor solution. The HYPERDRIVE Module features a high-power & compact motor + VESC combo paired to a robust custom gearbox with a 3/4" hardened 4130 output shaft. HYPERDRIVE Modules come assembled, wired, and programmed! Just add power and a PPM signal and you're in business! This is available in High Torque (3.67:1) or High Speed (1:1), perfect for a drivetrain or weapon application. Pick your gearing to best match your designs!

 

HYPERDRIVE Module Specs

Gear Ratio

3.67:1 (18T:66T), 1:1 (42T:42T)

Gearbox Material 6061-T6 Aluminum, Gold Anodized
Gear & Output Shaft Materials 4130 Chromoly Steel, Hardened 40HRC
Dimensions w/o Rear Motor Support Kit (L x W x H, in)

4.513" x 4.688" x 3"

Dimensions w Rear Motor Support Kit (L x W x H, in) 4.654" x 5.237" x 3"
Shaft Dimensions (Diameter x Length, in)

3/4" OD x 2.5" L, 3/16" Keyway

Mass w/o Rear Motor Support Kit (g, lbs) 2,163 grams (4.77 lbs)
Mass w/ Rear Motor Support Kit (g, lbs) 2,915 grams (6.43 lbs)
Recommended Voltage (VDC) 16S Lipo (59.2V Nom, 67.2V Peak)

 

HYPERDRIVE Gearbox Specs

Gear Ratio

3.67:1 (18T:66T), 1:1 (42T:42T)

Gearbox Material 6061-T6 Aluminum, Gold Anodized
Gear & Output Shaft Materials 4130 Chromoly Steel, Hardened 40HRC
Input Pinion Shaft Requirements (mm) 10mm OD x 30mm L, D-Shaft
Dimensions (Length x Width x Height, in)

4.181" x 1.952" x 3"

Shaft Dimensions (Diameter x Length, in)

3/4" OD x 2.5" L, 3/16" Keyway

Mass (g, lbs) 1,148 grams (2.53 lbs)

 

 

HYPERDRIVE Motor Specs

RPM/Volt (KV)

110KV

Max Voltage (V)

75VDC peak (6-18S LiPo)

Continuous Current (A)

70A

Max Current (A)

100A

Max Continuous Power (W)

4200W

Torque Constant (KT)

12.3 oz-in/A (.087 N-m/A)

Max Torque (oz-in, N-m)

 1345.3 oz-in (9.5 N-m)

Internal Resistance (Ohm)

0.055 (.055mΩ)

Motor Structure

12N/14P

Motor Dimensions (Diameter x Length, mm)

70mm OD x 70mm L

Shaft Dimensions (Diameter x Length, mm)

10mm OD x 30mm L, D-Shaft

Mass (g, lbs) 1,008 grams (2.22 lbs)
Bullet Connector Size

4mm

Sensors

Yes, Hall Effect + Thermistor

 

HYPERDRIVE VESC Specs

Voltage Range (V)

14-84VDC (4-20S LiPo)

Continuous Current (A)

100A

Max Current (A)

120A

BEC 

5VDC @ 1.5A

Max ERPM

150,000

USB Communication Type

USB-C

Supported Sensor Types

ABI, Hall, AS5x47, AS5x48

Supported Input Types

PPM, ADC, NRF, UART

Wire Size (AWG)

12 AWG

Size (Length x Width x Height, mm)

103mm x 58mm x 5.9-18.5mm

Mass (g, lbs) 225 grams (0.5 lbs)
Connector Types

4mm Bullets (Phase), XT90 (Power)

 

WARNING: This VESC does NOT have Phase Filters! Please turn OFF the phase filter function and choose "false" in VESC Tool when using firmware version on or above 5.3 (VESC_TOOL 3.01). Failing to turn off the phase filter will result in VESC damage. DO NOT restore the default parameters when using the wizard interface.

Close (esc)

Popup

Use this popup to embed a mailing list sign up form. Alternatively use it as a simple call to action with a link to a product or a page.

Age verification

By clicking enter you are verifying that you are old enough to consume alcohol.

Search

Added to cart